!!WARNING!!
If the firmware upgrade installation instructions are not followed properly the firmware upgrade could be data destructive and/or render your hard drive inoperable. As Seagate does not warrant the data on your drive, in addition to regular back-ups, if possible, your data should be backed up before upgrading the drive firmware.  Additional information on backing-up the contents of your drive can be found at www.seagate.com.  Though this firmware upgrade to your product is a change to the product the terms and conditions of your Seagate warranty for the product will remain effective to its normal expiration.  For other warranties on your product please consult the warranty documentation provided by your supplier.

Please select the type of product:

• Internal Disk Drives
• STORAGEBIRD External USB Drives
• SCALEO Home Servers

Internal Disk Drives

Please verify your drive model number, serial number, and firmware revision using the Drive Detect software.

Select your model number from the list below to begin firmware file download:  

The download is an ISO image which will create a bootable CD or an .EXE file which will create a bootable floppy disk.  For instructions on how to create a bootable CD please see: How to burn an .iso image onto a CD. To create a bootable floppy diskette simply double-click the downloaded file where you saved it and follow the prompts.

Click here for the firmware update procedure.

Note: The download utility will abort if it is not compatible with your current firmware revision. If you have any problems and your drive matches one of the models listed in this article, and a serial number check shows the drive is affected, please contact us via email.

STORAGEBIRD External USB Drives

Please verify your STORAGEBIRD external USB drive Seagate model number and serial number using the USB Drive List software.

Download:   STORAGEBIRD External USB Drive Firmware

The download is a ZIP file which will have instructions on how to start the firmware update procedure.

Note: The STORAGEBIRD XL-E and 35EV820 are not supported at this time.

Note: The download utility will abort if it is not compatible with your current firmware revision. If you have any problems and a serial number check shows the drive is affected, please contact us.

SCALEO Home Servers

Please verify your SCALEO Home Server drive Seagate model number, serial number, and firmware revision using this procedure: Update of the hard disk firmware in SCALEO Home Servers 

Download:   SCALEO Homer Server Firmware

The download is a ZIP file which will have instructions on how to start the firmware update procedure.

Note: The download utility will abort if it is not compatible with your current firmware revision. If you have any problems and a serial number check shows the drive is affected, please contact us.